Feetech Programming USB Interface for programmable Servo’s

Feetech Servo

Introduction

Using this USB interface to program FT programmable servo and to test “all brand”servo.
Please read the manual (Click here to download) before using the software and your new SCPC-1.
This SCPC-1 will allow you to easily check any servo brand’s servo performance by using servo test functions and set most of the programmable parameters of all FT digital servo types as noted in the following statement.


Required Optional Parts (Sold Separately)

  • “Y” cable or USB extension cable
  • One 4.8V or 6V “receiver” battery*.

*The SCPC-1 requires an external power source in order to test/program a servo.


WARNING: Be sure to use a fully-charged battery to prevent any data loss or damage during the programming process

Basic Set–Up Instructions

  • Download the SCPC-1 program software(ServoPC) from www.feetechrc.com. The SCPC-1 software is compatible with Windows XP and VISTA.
  • Plug the SCPC-1’s USB interface into your PC.
  • Start the ServoPC software from your PC.
  • Plug an external power source pack (4.8V or 6V battery) into the SCPC-1 ‘-+-’ slot.
  • A servo must be plugged into slot “S” in order to program or to test. The SCPC-1 supports only program one servo at a time.

Package Contents

  • One SCPC-1 USB interface device
  • One User’s Manual
  • The latest version of the software for the SCPC-1 is available on the Website (Click here to download)

3338_dimg2 3338_dimg3 3338_dimg4

Price Units
£6.44
Bookmark the permalink.